Matterhorn Men's Muckmen 15" Composite Toe Waterproof Internal Metguard Puncture Resistant Pull-On Work Boot — Black — MTC703
Matterhorn's 15" waterproof internal metguard pull-on features a composite safety toe and a puncture-resisting insole for added protection. It's also equipped with an external shin guard, the abrasion-resisting TigerTip® toe, a heavy-duty rubber outsole, and high-visibility reflective strips for added safety.
Key Features of the Matterhorn MTC703
-
Composite Safety Toe Cap — Non-metallic protection meeting ASTM F2413-18 for impact and compression.
-
Non-Metallic Internal Metguard — Protects the top of the foot without adding weight or bulk.
-
Non-Metallic Puncture Resisting Insole — Shields against sharp debris underfoot.
-
External Shin Guard — Extra coverage up the front of the 15" shaft for pull-on work in rough terrain.
-
Electrical Hazard Rated — Secondary protection against live circuits.
-
Waterproof SCUBALINER™ — Keeps feet dry in muck and standing water.
-
Matterhorn TigerTip® — Abrasion-resisting toe guard over the leather where the boot scuffs first.
-
Black Oil Full Grain Leather Upper — 15" pull-on with no laces to deal with.
-
High-Visibility Reflective Strips — Improve visibility in low-light conditions.
-
Removable Dual Density Foam Footbed and Internal Polyurethane Midsole — Cushioning that lifts out for an orthotic.
-
Taibrelle & Mesh Lining — Manages moisture from the inside.
-
Heavy Duty Rubber Outsole — Holds up to daily wear in demanding conditions.
Built for Muddy, Wet Job Sites
The 15" pull-on design and Black Oil full grain leather upper are built for jobs where you need to get in and out of the boot fast without dealing with laces. The waterproof SCUBALINER™ and external shin guard keep feet protected and dry in muck, standing water, and rough terrain — oilfield, mining, and utility work where a 6" or 8" boot leaves the shin exposed.
Protection From Toe to Shin
A composite toe up front, an internal met guard over the instep, a puncture-resisting insole underfoot, and an external shin guard up the shaft — with an EH rating on top. The toe, met guard, and insole are all non-metallic, so the boot stays as light as a 15" boot can.
Comfort for Long Days on Your Feet
A removable dual density foam footbed and internal polyurethane midsole cushion every step, while the Taibrelle and mesh lining helps manage moisture from the inside.
Why Choose the MTC703?
A 15" waterproof, non-metallic composite-toe pull-on with internal met guard, puncture-resisting insole, external shin guard, and reflective strips — the boot for deep mud, standing water, and low-light sites where you want everything below the knee protected.
Similar Styles to Consider
Want a lace-up met-guard logger? The Maximus 2.0 MTC300 is an 8" non-metallic composite-toe boot with a D3O® met guard. Need a USA-made steel-toe met guard for cold underground work? See the Klondike CV12000. Browse the full Matterhorn collection, or see every met guard boot and puncture-resistant boot at Overlook Boots.
Frequently Asked Questions
What safety standards does the Muckmen MTC703 meet?
A composite safety toe rated to ASTM F2413-18 for impact and compression, internal metatarsal protection, a non-metallic puncture-resisting insole, an external shin guard, and an electrical hazard rating for secondary protection against live circuits.
Why a 15" pull-on?
Coverage and speed. Fifteen inches keeps muck and standing water out where an 8" boot would flood, the external shin guard protects the front of the leg, and with no laces there is nothing to untie with cold, wet hands or to snag on equipment.
Is the Muckmen non-metallic?
The composite toe, internal met guard, and puncture-resisting insole are all non-metallic, which keeps the weight down on a boot this tall and keeps the toe warmer than steel in cold water.
How should a 15" pull-on fit?
Fit at the instep and heel matters more than length on a pull-on, since there are no laces to adjust. Size for a snug heel and room for the toes to spread inside the composite cap, which does not stretch; the footbed lifts out if you run your own orthotic. Tall socks help while the shaft softens around the calf.
What are the reflective strips for?
Visibility in low light — pre-dawn yards, night shifts, and underground headings where being seen by equipment operators matters. They are a mining-boot detail Matterhorn carries across its heavy-duty line.
What's the difference between the Muckmen MTC703 and the Maximus 2.0 MTC300?
Both are waterproof, non-metallic composite-toe Matterhorns with internal met guards and puncture-resisting insoles. The Muckmen is a 15" pull-on with an external shin guard and reflective strips for deep mud and water; the Maximus 2.0 is an 8" lace-up logger with a D3O® met guard for everyday mining and industrial work.
