Double H Dylan 12" Soft Toe USA Made Western Work Boot — Medium Brown — DH1552
This Men's 12" Domestic I.C.E.™ Work Western boot is built to bring you comfort and performance.
It's equipped with a cushioned insert for support and our ultra-strong oil- and slip-resisting I.C.E.™ outsole that's designed with outstanding abrasion resistance for longer wear. This style is proudly Made in the USA with global parts.
Key Features of the Double H Dylan DH1552
-
Old Town Folklore Leather Upper — Full-grain leather that breaks in to your foot and develops character with wear.
-
Soft R Toe — Tapered but rounded at the tip: reads western without the pinch of a pointed last.
-
12" Pull-On Shaft — Tall western coverage with no laces to deal with.
-
Leather Lining — Breathes and molds with the upper over time.
-
6 Row Stitch Pattern — Traditional western shaft detail.
-
Permafresh® Cushioned Insole — Shock-absorbing insole with anti-bacterial treatment.
-
Removable Midnight Shock Absorbing Polyurethane Insert — Lifts out for your own orthotic.
-
Electrical Hazard Rated — Tested by an independent lab to withstand 18,000 volts at 60Hz for one minute without leakage.
-
Oak I.C.E.™ Outsole — Industrial Compressed Elastomer, Double H's longest-lasting outsole; oil- and slip-resisting.
-
1 7/8 Inch Heel — A defined western heel that holds a stirrup.
-
Made in the USA with Global Parts — Built in Double H's Martinsburg, Pennsylvania factory.
Who the Dylan Is For
The Dylan is the soft-toe pick for ranch, agriculture, driving, and general work where you want a tall western pull-on and all-day comfort without a safety-toe requirement. Same platform, same leather, and same I.C.E.™ outsole as the steel-toe Dylan — just lighter up front.
I.C.E.™ Outsole and Western Heel
Industrial Compressed Elastomer is Double H's most abrasion-resistant outsole compound, built to hold its lugs and grip on oily or wet ground long after a standard sole has worn smooth. The 1 7/8" heel gives a stable, slightly raised stance and holds a stirrup — the standard height for a ranch boot.
Two Layers of Cushioning
A Permafresh® insole handles shock absorption and odor control underneath, while the removable Midnight polyurethane insert cushions the strike on top. Pull the insert if you run your own orthotic.
Similar Styles to Consider
Shop more: Double H USA Made, Double H
Frequently Asked Questions
What kind of toe does the Dylan DH1552 have?
A soft R toe — tapered but rounded at the tip, with no safety cap, so it stays light and roomy up front. If your jobsite requires an ASTM-rated toe, the DH1592 is the same Dylan with a steel safety toe rated I-75/C-75.
Is the Dylan electrical hazard rated?
Yes. Double H tests the DH1552 through an independent lab to withstand 18,000 volts at 60Hz for one minute without leakage, giving you EH protection even without a safety toe.
What sizes and widths does Double H make the DH1552 in?
Double H lists the Dylan in B (narrow), D (medium), and 2E (wide) widths, in sizes 7 through 15 including half sizes.
How should a pull-on western boot fit?
Fit at the instep and heel matters more than length on a pull-on, since there are no laces to adjust. The boot should take a little effort to pull on with a slight heel slip that settles as the leather breaks in. Try it with the sock you actually wear to work, and if you are between widths, take the wider one.
How do I care for Old Town Folklore leather?
Wipe the boots down, let them dry away from direct heat, and condition the leather a few times a year to keep the shaft supple. Skip the power washer — it strips the oils from the leather and the upper will crack.
What is the difference between the DH1552 and the DH1592?
Same 12" pull-on Western build, Old Town Folklore leather, Permafresh® insole, and Oak I.C.E.™ outsole. The DH1552 is the soft-toe version; the DH1592 adds a steel safety toe for jobs that require rated toe protection.
