Double H Jeyden 11" Composite Toe Waterproof Western Work Boot — Light Brown — DH5124
This Men's 11" Wide Square Composite Toe I.C.E.™ Roper is built to deliver the comfort, protection and performance you need.
It's equipped with a composite safety toe and a removable footbed for support, plus our ultra-strong and flexible mini-lug I.C.E.™ outsole and heel that are designed to resist abrasion for longer wear.
Key Features of the Double H Jeyden DH5124
-
Composite Safety Toe — Non-metallic cap meeting ASTM standards for compression and impact at I-75/C-75, with reduced cold transfer.
-
100% Non-Metallic Construction — Composite toe and non-metallic shank; no steel in the boot's structure.
-
Electrical Hazard Rated — Tested by an independent lab to withstand 18,000 volts at 60Hz for one minute without leakage.
-
Waterproof Membrane — Tested to withstand the wettest conditions.
-
Buff Tan Crazyhorse Leather Upper — Rugged leather that distresses handsomely with wear.
-
Wide Square Toe — Room for the toes to spread inside the composite cap.
-
Stitched Leather Welt — Stitched sole construction; resoleable.
-
Removable Double Tuff PU Insert over a PU Footbed — Two layers of cushioning; the insert lifts out for an orthotic.
-
Mini Lug I.C.E.™ Outsole & Heel — A flexible Industrial Compressed Elastomer compound built to resist abrasion.
-
1 3/4 Inch Heel — A defined western heel that holds a stirrup.
100% Non-Metallic Build
The Jeyden pairs a non-metallic composite safety toe with a non-metallic shank, meeting the same I-75/C-75 impact and compression thresholds as steel while staying lighter and warmer at the toe, with an EH rating on top.
Waterproof, With Resoleable Construction
A waterproof membrane keeps feet dry, and the stitched leather welt attaches the outsole with stitching rather than adhesive, so a cobbler can replace the mini-lug I.C.E.™ sole when it wears through and you keep the broken-in upper.
Mini-Lug I.C.E.™ Outsole
Double H's I.C.E.™ compound in a low-profile mini-lug pattern: flexible underfoot, oil- and slip-resisting, and built to resist abrasion so the tread lasts.
Similar Styles to Consider
Shop more: Double H Safety Toe, Double H Square Toe, Double H Waterproof
Frequently Asked Questions
What safety rating does the Jeyden DH5124 carry?
A composite safety toe that meets ASTM standards for compression and impact at I-75/C-75, plus an electrical hazard rating tested to 18,000 volts at 60Hz for one minute without leakage.
Is the Jeyden completely non-metallic?
Yes. Double H lists the DH5124 as 100% non-metallic — composite toe and non-metallic shank — which keeps it lighter than a steel-toe western and warmer at the toe in cold weather.
Can the Jeyden be resoled?
Yes. The stitched leather welt attaches the outsole with stitching rather than adhesive, so a cobbler can replace the mini-lug I.C.E.™ sole when the tread wears down.
How does the waterproofing work?
A waterproof membrane is built into the boot, so it is a sealed layer rather than a surface treatment and does not wash off with wear. Conditioning the Crazyhorse leather keeps the upper supple so the membrane keeps doing its job.
How does a wide square composite toe fit?
The wide square last gives the toes lateral room inside the cap. A composite cap does not stretch, so size for room across the forefoot from day one and a snug instep on this pull-on; the leather shaft breaks in, the cap does not. If you are between widths, take the wider one.
What's the difference between the Jeyden DH5124 and the Cleave DH5422?
Both are waterproof, 100% non-metallic composite-toe Double H westerns with an EH rating. The Jeyden is an 11" wide square toe on a stitched leather welt with a mini-lug I.C.E.™ outsole; the Cleave is a 12" U toe from the Phantom Rider collection on a cement construction with an AG8™ footbed.
