Phantom Rider Men's Dailor 8" Square Toe Western Work Boot – Dark Brown – PH5016
The Double H Dailor (PH5016), part of the Phantom Rider line, is an 8-inch pull-on western work boot with a wide square toe, built for ranch, barn, and agricultural work. Soft toe, electrical hazard protection to 18,000 volts, with a Barnyard acid-resistant leather upper that stands up to the manure, fertilizer, and chemical exposure that breaks down ordinary leather. Goodyear welted, so it can be resoled when the outsole wears through.
What the Double H Dailor is Built For
This is a no-safety-toe western boot for working environments where chemical and acid exposure is the daily reality: cattle operations, dairies, hog barns, feedlots, and general ag work. The Barnyard acid-resistant leather is the reason to buy it. Standard-work leather cracks and rots when it sits in barnyard acids and animal waste; this upper is tanned to resist that breakdown, which is what gives you a full working life out of the boot instead of a few months.
If you need a protective toe to meet a jobsite spec, this isn't the boot. It's a soft toe. The same boot is also offered with a composite toe (PH5012).
Specs
-
Barnyard acid-resistant leather upper: resists the breakdown caused by manure, fertilizer, and chemical exposure in ag and livestock work
-
Soft toe – no safety toe components; built for comfort and flexibility, not impact protection
-
Electrical hazard protection: tested to withstand 18,000 volts at 60 Hz for one minute without leakage, secondary protection against open circuits underfoot
-
Goodyear welt construction: the welt runs all the way around, so the boot is resoleable; you replace the outsole, not the boot
-
AG8™ dual-density PU removable footbed: an update to the AG7, with enhanced arch support for long days on your feet; pull it out to dry or replace it
-
Removable kiltie: the leather flap over the laces, here over the pull-on instep; take it off if you don't want it
-
Unlined: no liner means a natural fit and less heat in warm-weather work
-
I.C.E.™ outsole: Industrial Compressed Elastomer, Phantom Rider's longest-lasting compound that resists abrasion
-
Oil and slip resistant: the outsole meets the ASTM F1677 slip resistance standard and resists oil
-
Rubber heel rand, EVA midsole, 1" heel height
Sizing
This boot comes in Medium and Wide widths. We don't have a confirmed true-to-size note for the Dailor, so if you're between sizes or usually size up in pull-ons, that's worth keeping in mind. Check the listed width against what you normally wear.
Care
Don't power-wash the leather; it strips the oils and causes it to crack. For barnyard-acid exposure, rinse off waste at the end of the shift and let the boots dry away from direct heat. Condition the leather periodically to keep it from drying out.
Double H Dailor boots are in stock and ship free. Resole it when the I.C.E.™ outsole wears through, and it'll outlast a couple of pairs of cheaper boots.
