Winter Boots on Dark Wooden Table.

October has passed, the days of falling yellow leaves and heavy rains are beginning to fade, and the smell of frost in the air is finding its way to your nostrils all too often. Aside from getting your winter coat out of the closet and wondering where those thick wool scarves ended up during the year, there is probably another question crossing your mind. What’s going to keep your feet warm and dry for the next few months?

There are so many things to cover when equipping yourself with a quality pair of winter boots. First of all, how well are they insulated? How comfortable are they? Do they give good maneuverability, or does all that insulation make them too rigid? Does the sole provide good traction to prevent slipping on frozen surfaces?

If you are a worker and need a pair for your job, then there’s also safety to consider and the fact that you will be spending at least 8 hours a day wearing them.

Different Options for Different Needs

Naturally, every winter boot model will be made to be warm, comfortable, and durable. However, “winter” can mean a whole lot of different conditions that need addressing. For instance, how low of a temperature will you be exposed to? Do you spend your time in the boots staying still or participating in some activity? Are there a lot of slippery surfaces to walk on?


Insulation is something everyone will consider when buying a pair of winter boots, but not a lot of people know how much insulation they need. After all, winter temperatures can vary greatly, so there are different insulation types and thicknesses to cover all possible conditions and needs. Insulation thickness is measured in grams (G) and it represents the thickness of the insulating material.


Not quite for snow and winter, but more adequate for cold weather. With moderate physical activity, this level of insulation will likely keep your feet warm in normal autumn temperatures, but they still might be a bit too thin for you if you spend most of your day sitting outside.


We are now getting into the winter levels. If temperatures are getting near freezing and it’s starting to look like snow - start thinking about at least 600G of insulation. If you’re active during your day, this should be enough to keep you warm and dry.


For harsh winters, with sub-freezing temperatures. This insulation thickness will affect your mobility, so it’s best suited for those who are mostly stationary during the day. Baring really extreme temperatures, this should be enough to keep your feet warm even with minimum activity. 


This amount of insulation is intended for the most extreme temperatures, accompanied by snow and ice. Frostbite is a real danger in these cases, so if you are exposed to such conditions for longer periods, 1000G or more will be necessary. It is suitable for very little activity, as this amount of insulation limits mobility drastically.

Insulation Types

Long gone are the days where you would just buy whatever keeps your feet warm. Depending on the nature of your need, there is a variety of insulation types to choose from.

We’ll go over each specific type of insulation.

Thinsulate Insulation

The worldwide favorite and reigning champion when it comes to insulation technology. Probably the most advanced insulating material available, it uses fibers much smaller than any other insulating material, making it more effective as you can fit more of it into the same amount of space.

It is lightweight, very flexible, and extremely durable as it does not compress over time. Hence it’s very good at keeping the shape even after a long period of use. It is also breathable and wicks away any moisture from the inside, providing great conditions for your feet in prolonged periods of wearing.

Removable Wool

The traditional, yet still effective form of insulation. Unlike most modern insulation types, this one is not built-in so it can be taken out at will and washed or allowed to try after it gets wet. This, however, means that moisture can find its way to the inside of your boot, and the insulation provided in terms of heat-efficiency is not optimal.

Shearling Insulation

Shearling insulation offers great comfort as it is very soft and fluffy, making the boots easy to wear for longer periods. It also does a great job of keeping your feet warm even in extremely cold temperatures. However, most shearling insulated boots are not made for rugged outdoor environments, but for day-to-day activities.

Litefire Insulation

If there is any other type of insulation that can match the efficiency and quality of Thinsulate - it would have to be Litefire. In the process of its creation, it is first laid down in a gaseous state before being turned into a solid one. The result of this is an incredibly breathable material that is highly resistant to both water and wind, while still being very lightweight and thin.

Also, instead of layers and layers of insulation for collecting your body heat, Litefire reflects that heat right back, providing better long term warmth for your feet. Optional additional insulation can be added if needed as well, so you really need not worry whether your feet will be warm and dry should you opt for this insulation type.

Waterproof vs Water-Resistant

If those two terms tend to confuse you and make you wonder what the difference is between them, here is a short summary. Whether it is boots, shoes, a watch, or a phone, you may see a waterproof or water-resistant sign on them, and it wouldn’t hurt knowing what the manufacturer means by that.


Waterproof Overlook Boots

Waterproof means that the product, in our case a boot, can be completely submerged into water and the material simply would not soak any of it. Such boots are usually made of synthetics or rubber, materials that shed water, and don’t let a drop through. Be it rain pouring from above, treading through a puddle, or even keeping your foot in it, your feet will not get wet. 

However, not everything is on the bright-side here. Given that the materials used for waterproof boots are not so flexible and actually tend to be a bit stiff, they will often give less comfort than those made of more flexible, non-waterproof materials. Of course, in these modern times, everything is being done to increase comfort and make up for it in different ways, be it padding, insoles, or other methods.

Another con here is that these waterproof materials also tend to be less breathable. Yes, they keep the water at bay, but they also keep the air inside, not counting the small amount that finds its way up the shaft. The material itself doesn’t breathe, so should your feet start to sweat, they may create a dark, damp atmosphere inside your boots. These are the ideal conditions for fungus and bacteria to thrive in, which may lead to bad odors, or even worse, feet infections.

You could find alternative ways to deal with this, of course, such as socks that wick away your sweat drops or breathable lining. It depends on your needs and the amount of sweat you produce, so consider all matters when picking your pair of winter boots.


Water Resistant Boots

Water-resistant means that the material is keeping the water at bay for a certain period of time. If submerged, just like in the waterproof example, the water-resistant pair of boots would repel the water for a short period before starting to soak. 

These materials are more breathable than those of waterproof boots and will allow the air to flow in and out. Aside from air, it also lets moisture escape from the inside, providing better conditions for your feet. For these reasons, they can not provide the same amount of protection from water and will eventually soak if left exposed to it for too long.

With water-resistant footwear, it is important to pay attention to the seams, as these are the spots where the water is most likely to find its way to the inside of your boot. Another thing to keep in mind is that if you are treading through muddy puddles or any other form of dirty water, your boots will soak it up eventually, providing good conditions for bacteria to grow. So washing your water-resistant boots after they’ve been soaked in unclean water is a strong recommendation. 

For extra hard-working individuals that are not spared of heavy-duty work even in freezing temperatures, safety is another concern that has to be covered. So aside from comfort, durability, good insulation, these boots will have to provide the workers with protection from falling objects, piercing damage, or any other potential form of harm.

Toe Protection

Where the tip of the boot is concerned, there are a few options to consider, depending on the amount of protection your toes need.

  • Soft Toe: Regular boot tip. This option gives you no extra protection for your toes and is usually picked by people that don’t expect to be exposed to this form of harm. It does leave the tip of your boot in it’s most flexible state.
  • Composite Toe: Using lightweight yet resilient materials, this option is the middle-ground in safety terms. It provides a good balance in mobility and protection, so if you think a steel toe is too extreme for you, this is your safe bet. Also, since it is not made of metal, a composite toe will transmit cold or heat far less than it’s steel counterpart.
  • Steel Toe: The ultimate protection for your toe. Heavyweight, but sturdy, it will keep your toe safe in most working conditions, but at the price of added weight and lack of flexibility in the front part of the boot.
  • Puncture Protection

  • Puncture-Resistant Plate: Built into the sole of the boot, this plate protects your foot against piercing damage from sharp objects on the ground, such as nails, pieces of glass, etc. If you work in an environment where you are exposed to these dangers, a puncture-resistant plate is a no-brainer. 
  • Metatarsal Guard

  • Metguard: Your toes are not the only part of your foot exposed to damage from falling objects. If you work in a hazardous environment, protecting the fragile metatarsal bones on the top of your foot is also worth your consideration. With a reinforced toe box accompanied by a metguard, your foot will be as safe as it can get.
  • Our Recommendations

    As usual, with these recommendations, we will try to cover a few models that have proved best and are widely used in certain jobs, activities, or just for day-to-day use. However, when picking your own pair, take your time to find what is best suited for your needs and the conditions you’ll be facing.

    Danner Mountain 600 Weatherized

    Danner Women's Mountain 600 Soft Toe Hiking Boot

    • Optimal for winter hiking

    A great hiking model from Danner that you will not regret buying if you are into long hikes over rough, snowy terrain. With 200G of Primaloft insulation, this boot will keep your feet warm even in freezing temperatures as long as you keep moving. And since they are optimized for hiking, we will assume that you do intend to keep on moving. 

    The Vibram SPE midsole is a comfort masterpiece, striking a perfect combination of rubber and EVA foam. It adapts to the foot very well and provides great long-term comfort and impact absorption for those exhausting days of treading through mountain peaks and snowy, rock-covered paths.

    Vibram also features an extra grippy outsole - Megagrip. It will keep excellent traction on almost any surface, including snow, slush, and muddy slopes.

    Carhartt Men’s 10” Waterproof Insulated PAC Composite Toe Boot

    Carhartt Men’s Waterproof Boots

    • Optimal for working in winter conditions

    A well-insulated work boot that includes the necessary safety features for heavy-duty work conditions. Apart from providing foot protection with a Composite Toe, this model also offers great comfort for longer wearing periods. The boot is 100% leather with a rubber sole and has 1000G of LiteFire insulation. Despite this insulation thickness, this boot is still flexible enough to be used while moving and working, thanks to the nature of LiteFire materials.

    Storm Defender Waterproof Breathable protection guarantees you warm and dry feet in most types of wet conditions, while still allowing the air to circulate, providing your feet with a much-needed gasp of fresh air.

    Timberland White Ledge Men’s Mid Waterproof Boot

    Timberland White Ledge Men’s Mid Waterproof Boot

    • A great all-rounder

    An incredibly well-rated all-round shoe from Timberland. Extremely durable, confirmed by a great number of buyers, they can withstand hikes through mud, snow, streams, or any other rough terrain you might encounter. All this, while still having the stylish looks to be worn on your way to the office during the workdays. 

    This model is also very comfortable and doesn’t have too deep of a shaft. It provides good arch support and is made from lightweight materials, making it very easy to be worn all day. So if you are just looking for a quality pair of winter boots for everyday use that will also serve you on your occasional hike or a mountaineering excursion, this is definitely a pair you should at least consider.

    Get the Winter Boots According to Your Needs

    As you can see, there are quite a few things to consider when buying a pair of winter boots for the season. Take all of the above into consideration, and then browse our collection of the highest-quality winter boots there are.

    Winter boots