Botas impermeables Carolina

A brown Carolina Waterproof work boot standing in muddy water, with a dark mountainous outdoor background and large text reading 'CAROLINA WATERPROOF' on the right side.

Preguntas frecuentes

A waterproof boot uses a sealed membrane and sealed seams so water cannot work through the leather or the stitching. Water-resistant leather sheds rain and handles damp ground but wets through with sustained exposure. The distinction matters if you stand in water rather than walk through it, and it is stated in the product title.

High enough for the water you actually stand in, since the membrane protects only to the collar. A 6-inch waterproof boot handles wet ground and rain. If you work in standing water or deep mud, a 10 or 12-inch Wellington does far more for you than a better membrane on a short boot. Height is stated in every product title.

Usually sweat rather than leakage, particularly in warm weather when the membrane cannot breathe effectively. The other common cause is water coming in over the collar, which no membrane prevents. If the outer leather is soaking through, that is a worn water-repellent finish rather than a failed membrane, and it can be restored.

Yes. Membranes fail at seams and flex points over a few years of hard wear, and unlike an outsole they cannot be replaced. Treat waterproofing as a finite feature. The outer repellent finish wears off much sooner and can be restored by cleaning the boot and reapplying a treatment, which fixes most complaints.

The Miter EXT and Miner. A metatarsal guard covers the instep, which a safety toe leaves exposed, and it is specified where heavy objects can roll or drop onto the top of the foot. It is rated as part of the finished boot rather than added later. See our metatarsal boots range.

The Well X and Laser are, and their height is a real advantage since a waterproof boot only protects to its collar. A 12-inch shaft keeps you dry through considerably more standing water than a 6-inch boot would. See our Carolina Wellington range.

Yes, and the combination is standard for winter work since wet insulation stops working and snow melts against a warm boot. Insulation weight is stated in every product title where it applies. Match it to how much you move rather than to the temperature. See our Carolina insulated range.

Clean the dirt off regularly, since it clogs the outer material and stops moisture escaping, which causes clammy feet. Condition the leather every one to three months. Dry at room temperature away from direct heat, which damages both the leather and the membrane adhesives. Never dry them on a radiator.

Botas impermeables Carolina

Preguntas frecuentes

Vistos recientemente

Nuestras marcas principales

Preguntas frecuentes

What is the difference between waterproof and water-resistant?

How high should a waterproof boot be?

Why do my waterproof boots feel wet inside?

Does waterproofing wear out?

Which waterproof models have met guards?

Are the Wellingtons waterproof too?

Can waterproof boots also be insulated?

How do you care for a waterproof leather boot?